Sets the brightness of outputs (Lc1-18) to a value relative to the input (MBr).Į.g. Resets parameters and settings of the block to the default values as specified in the block preset. If the lighting is operated manually, lighting is switched off only after the time set in parameter (Met) has expired.
(e.g Child lock, cleaning)Ĭontrol via user interface is still possible. If the current brightness exceeds the threshold (Brt), presence / motion is ignored.ĭisables inputs (Lc1-4, M+, M-, Mood, Off, T5/1-8, On, Buzzer, MBr) when On. If no alarm clock mood is configured, the mood with ID 99 is used instead. Fading is only supported by Smart actuators. Parameter (MaxAbr) defines the brightness, parameter (Afi) defines the flashing interval.Īctivates alarm clock mood (ID 98) when 1. Used outputs (Lc1-18) start flashing when 1. If no mood with ID 99 is configured, all used outputs (Lc1-18) will be activated with brightness set in parameter (MaxAbr). If the lighting is operated manually, the lighting is only switched off after parameter (Met) has expired. Long-click: Either mixes in the mood (Mmd) or switches to the next mood.Īctivates the lighting mood configured for motion / presence when 1.īy falling edge, the lighting is switched off after expiration of parameter (Moet). If there is no additional pulse for 30 seconds, a pulse selects the assigned mood again.
Pulse: First pulse selects the assigned mood, every subsequent pulse switches to the next mood. Triple-click: Turns off lights and sends pulse to output (3C). Table of Contentsĭouble-click: Turns off lights and sends pulse to output (2C). You can find inspiration and use cases regarding the numerous possibilities with lighting control on our website. In combination with presence or motion detectors and brightness sensors, the block provides automatic lighting control.Īpart from the Loxone App, it is operated by the centre button of a Loxone Touch according to the switch standard, or by conventional buttons. The individual lights can be adjusted as desired and any combination can be saved as a lighting mood. It supports switched and dimmed lighting as well as coloured light and luminaires with different interfaces. The Lighting Controller function block enables the control and operation of lighting in a room or an area.
0 kommentar(er)
